8. In the Allowed RADIUS Clients field, you will need to specify an IP address or a range of IP addresses of the RADIUS clients allowed to connect to your CDAP installation. You would like to allow access to the RADIUS proxy only from the ADC in the simplest case. Communications between the ADC and its installed Add-ons are performed over the virtual Docker network within the ADC.
The ADC IP address on the Docket network is displayed as a hint in the Allowed RADIUS Clients field before any input. Please use this IP address.
9. Please enter a suitable password in the Secret field that the RADIUS clients must use when connecting to the CDAP. We will use this password when configuring the Edgenexus ADC for RADIUS authentication.
10. The choice of Failmode setting determines whether access should be allowed if the Cisco Duo Cloud becomes unavailable.
